Which timesheet software tracks hours for government cost reimbursement
By Jordan Ellis Published 9 min read
As an Amazon Associate I earn from qualifying purchases. That costs you nothing and does not decide what gets recommended. We also earn a commission from some links to partner brands (SentryPC, HappyScribe, Sucuri, IceVPN).
On this page (8 sections)
- The short version
- Cost reimbursement rules change what timesheets must record
- Charge code structure depth determines audit readiness
- Audit trails must show who changed what and when
- Which timesheet software tracks hours for government cost reimbursement
- How to verify software meets audit and reporting standards
- Common mistakes that fail audits
- Questions people still ask
In short: Deltek Costpoint, Unanet, and Replicon are among the timesheet platforms contractors use for cost-reimbursement work because they track labor to job codes, maintain required audit trails, and generate DCAA-compliant reports when properly configured.
Part of our guide on tracking billable vs non-billable tasks
Most timesheet software fails government audits because it rounds hours or lacks the charge code depth DCAA auditors demand in cost-reimbursement contracts.
Deltek Costpoint Mastery: ERP for Government Contractors
No information on project hierarchy depth or charge code levels to confirm compliance with DCAA four-level
Check the specs on Amazon| Daily entry requirement | within 24 hours of work performed |
|---|---|
| Audit trail retention | minimum 3 years after final payment |
| Charge code depth | contract, task, subtask, labor category |
| Approval levels | employee, supervisor, sometimes PM |
| Rounding tolerance | none permitted on billed hours |
The short version
- Daily timekeeping with supervisor approval is preferred over weekly batch entry in DCAA audits
- Software must tie every hour to a contract line item or indirect cost pool without rounding
- Audit trails showing who changed what and when are required under FAR 31.201-2
- Most project management tools lack the charge code structure government auditors expect
- Free and low-cost timesheet apps cannot generate the SF-1408 labor reports contracts require
Cost reimbursement rules change what timesheets must record
A cost-reimbursement contract pays you for labor actually spent plus overhead and fee. The government reimburses based on your timesheet data, so Federal Acquisition Regulation 31.201-2 requires contemporaneous daily recording. This means employees must enter time within 24 hours of performing the work. Auditors verify this by checking system logs.
Weekly timesheets fail this requirement. Systems that allow backfilling a week later risk noncompliance because memory fades and post-hoc entries are easier to falsify. DCAA has cited audit findings where late or bulk entries caused disallowed costs.
Your software must also tie every hour to a specific contract line item and labor category without rounding. For example, if you bill 37.4 hours on Task 0002 as Engineer II, your timesheet system must store and report that exact figure. Rounding creates variances auditors will flag and require explanation.
Deltek Costpoint Mastery: ERP for Government Contractors
No information on project hierarchy depth or charge code levels to confirm compliance with DCAA four-level charge code requirement.
- Is adult product False
- Height 9.0 inches
- Length 6.0 inches
Charge code structure depth determines audit readiness
A compliant timesheet captures at least four nested levels: the contract or purchase order number, the task or Contract Line Item Number (CLIN), the subtask or work package, and the labor category. Some contracts add a fifth level for deliverables or cost elements. The system must enforce entry at the lowest level every time. We cover how does qualified overtime tracking work in its own article.
Most project management tools stop at two levels: project and task. This works for fixed-price contracts where labor tracking is internal but fails for cost-reimbursement because auditors need to trace every hour to the government-paying line item. A charge code like 'FA8201-23-C-0001 / 0003 / Software Development / Senior Developer' as one string is inadequate because auditors cannot filter or pivot it.
Software must prevent charging to unauthorized contracts, closed tasks, or unqualified labor categories automatically. Manual enforcement does not hold up in audits. Automated validation is necessary.
| Contract type | Minimum levels | Labor category required | Indirect codes required |
|---|---|---|---|
| Cost-plus-fixed-fee | 4 | Yes | Yes |
| Cost-plus-award-fee | 4 | Yes | Yes |
| Time-and-materials | 3 | Yes | No |
| Fixed-price-level-of-effort | 3 | Sometimes | No |
| Firm-fixed-price | 2 | No | No |
Audit trails must show who changed what and when
Every timesheet edit generates a log entry with employee name, timestamp, old value, and new value. FAR 31.201-2(d) requires an adequate system of internal controls, which DCAA interprets as immutable logs that cannot be deleted or overwritten by employees or supervisors. If that sounds like your situation, read up on time tracker for contractors with multi currency payroll support next.
If an employee enters 8 hours on Monday, then changes it to 6 hours on Wednesday and moves 2 hours to another charge code, the system must log both transactions with reasons. The audit trail preserves the original 8-hour entry. The final timesheet shows 6 hours, but export files include both lines flagged as edits.
Supervisor approval adds a layer of control. Once approved, further changes require documented reasons and sometimes second approval. Most audit disputes arise from missing or incomplete audit trails. Software either logs all changes or it does not.
- Employee edits: timestamp, old and new values, field changed, reason if policy requires
- Supervisor actions: approval timestamp, rejection reason, delegation if another manager signed
- System changes: rate updates, charge code corrections, retroactive adjustments with admin notes
Which timesheet software tracks hours for government cost reimbursement
Deltek Costpoint is commonly used by larger government contractors with multiple cost-type contracts and complex indirect rate structures. Vendors claim it enforces daily entry, maintains immutable logs, and generates SF-1408 Preaward Survey and DCAA-incurred cost reports natively. Charge code depth often extends to five or six levels. Costpoint is positioned for enterprise users; small contractors often consider less complex or lower-cost alternatives. Verify pricing and total cost of ownership with the vendor. The other half of this decision is optimizing onboarding duration.
Unanet serves mid-size contractors with ten to several hundred employees working on cost-plus and fixed-price contracts. It includes a government compliance module enforcing DCAA timekeeping rules and integrates with several accounting systems; confirm supported versions. Implementation timelines vary by environment; ask for references and realistic timelines.
Replicon is a standalone timesheet system for contractors managing project accounting separately. It supports configurable four-level charge codes, exports audit trails, and locks approved timesheets in certain editions. Confirm exact capabilities and limits with the vendor. Integration work is necessary to connect with invoicing and cost reports, manageable for small contractors but more complex at scale.
| Platform | Charge code levels | Daily entry enforcement | SF-1408 generation | Typical user count |
|---|---|---|---|---|
| Deltek Costpoint | 5-6 | Yes | Native (verify edition) | 50-5000+ |
| Unanet | 4-5 | Yes | Yes (verify edition) | 10-500 |
| Replicon | 4 | Yes | Via export (verify edition) | 5-200 |
- These vendors offer features configurable to meet DCAA adequacy standards; adequacy depends on configuration, implementation, and policy enforcement
- Audit trail and approval workflows are integrated rather than add-ons
- Charge codes map to contract structures without custom field hacks
- Costpoint's learning curve and cost exclude most small contractors
- Unanet requires integration work if your accounting system is unsupported
- Replicon lacks native project accounting, so labor distribution is separate
How to verify software meets audit and reporting standards
Request a demo focused on a cost-reimbursement scenario. Provide a sample contract structure with four levels and ask the vendor to show employee time entry, supervisor approval, and audit trail export. If they cannot demonstrate these steps in the demo, the software either lacks support or requires custom development.
Ask if the system generates SF-1408 Section 2 labor reports and DCAA incurred cost submission data natively. Platforms that meet the standard produce these without exporting to spreadsheets. Manual assembly increases workload and risks errors.
Check audit trail exports for employee name, original and new values, change timestamp, and change reason if required by policy. Missing fields mean an incomplete trail that auditors will reject, forcing costly reconstruction.
- Set up a test contract with four charge code levels: contract number, task, subtask, labor category.
- Have a test employee enter 8 hours on Monday, then edit on Wednesday to move 2 hours to a different charge code.
- Run the audit trail report and confirm original and edited entries appear with timestamps and user names.
- Have a supervisor approve the timesheet, then attempt another edit and verify the system blocks it or requires documented reason.
- Export a sample SF-1408 Section 2 or DCAA incurred cost report and confirm data matches entries without manual adjustments.
Common mistakes that fail audits
Using project management tools with added time tracking is a frequent failure. Tools like Asana, Monday, or ClickUp track internal effort but lack charge code depth, audit trails, and labor distribution reports required for cost-reimbursement. They work for fixed-price work but not cost-plus.
Allowing employees weekly or bulk time entry violates the contemporaneous recording rule. Some contractors assume approval before invoicing suffices. It does not. Auditors check system log timestamps and spot bulk entries easily. DCAA has cited disallowed costs due to this.
Rounding hours to the nearest quarter-hour creates variances between billed and recorded time. For example, if many employees round up 0.1 hours daily over a month, that adds untraceable time. Auditors compare timesheets to invoices line by line and flag mismatches.
- Weekly entry: fails DCAA daily recording even if before invoicing
- Concatenated charge codes: single strings combining contract, task, and labor category cannot be filtered or validated
- No supervisor approval: DCAA requires independent review; employee self-approval is insufficient
- Missing edit reasons: audit trails without documented reasons for changes are inadequate
Questions people still ask
Can I use a spreadsheet for timesheets on a cost-reimbursement contract?
Spreadsheets can meet DCAA standards if they capture daily entries, maintain immutable change logs, enforce charge code structure, and restrict editing after supervisor approval. This requires extensive macros or locking mechanisms difficult to maintain. Auditors prefer purpose-built systems because controls are harder to bypass. For fewer than ten employees and one simple contract, a well-designed spreadsheet might pass. Larger setups need dedicated software.
What happens if my timesheet software fails a DCAA audit?
DCAA issues a finding your accounting system is inadequate and gives 60 to 90 days to correct it. You can bill during that time, but the agency may withhold payments or ask for extra documentation. Failure to fix can lead to cost disallowance, refund demands, and suspension of future awards. Contractors have lost contracts over inadequate timekeeping. Fixes include switching to compliant software and reconstructing records as best possible.
Do I need separate software for timesheets and project accounting?
Not always. Deltek Costpoint and Unanet combine timekeeping, project accounting, and indirect rate calculations in one system, reducing integration complexity and improving data consistency. Replicon focuses on timesheets and requires separate project accounting. This works if you already have solid accounting but adds complexity if starting fresh.
How far back do audit trails need to go?
FAR requires records retention for three years after final payment, and six years if the contract is disputed or investigated (see FAR 4.705). Your software must store audit logs for at least that long without degradation. Archiving to cheaper storage is acceptable if retrieval on request is assured. Deleting logs to save space is not allowed.
Can I use mobile timesheet apps for government contracts?
Yes, if they meet the same standards as desktop systems: daily entry, four-level charge codes, audit trails, and supervisor approval. Deltek, Unanet, and Replicon offer mobile apps syncing with their main systems. Standalone mobile apps without integration usually lack required depth. The backend structure is what matters, not just phone entry.