Skip to content

Square Reader not connecting? Fixes for Bluetooth, iPhone and Android

By Updated 7 min read

On this page (9 sections)
  1. The short version
  2. How Square Reader connects to your phone
  3. Why your Square Reader might not connect via Bluetooth
  4. Step-by-step fixes for Square Reader not connecting on iPhone
  5. Step-by-step fixes for Square Reader not connecting on Android
  6. Common mistakes that block Square Reader from connecting
  7. How to choose or replace a Square Reader when connection fails
  8. Square Reader not connecting: specific checks for Bluetooth, iPhone and Android
  9. Questions people still ask

In short: If your Square Reader is not connecting, start by ensuring Bluetooth is on and the Reader is charged, then check your device’s Bluetooth list for the Reader’s name. Restart your phone and Reader if needed, and verify app permissions for Bluetooth and location services.

Part of our guide on cleaning square reader safely

At a glance
Bluetooth rangeup to 30 ft
Battery life6-8 hours typical
Bluetooth versionLE (Low Energy)
Reconnect timeoutabout 30 seconds
App permissions neededBluetooth, Location

The short version

  • Square Reader relies on Bluetooth LE and stable power.
  • iPhone and Android handle Bluetooth differently; permissions matter.
  • Restarting devices clears common connection glitches.
  • Firmware and app updates often resolve compatibility issues.
  • Physical damage or battery issues often require replacement.

How Square Reader connects to your phone

Square Reader uses Bluetooth Low Energy (LE) to pair with smartphones and tablets within approximately 30 feet. This low-power connection ensures long battery life while maintaining data security during transactions.

Your phone’s Bluetooth must be active and capable of LE for a successful connection. Both iPhone and Android devices support this, but their Bluetooth stacks and permission models differ, which often causes connection issues.

The Square Point of Sale app handles pairing and communication. It requests Bluetooth and location permissions because some Android versions require location access for Bluetooth scanning.

Why your Square Reader might not connect via Bluetooth

smartphone Bluetooth settings showing Square Reader device
smartphone Bluetooth settings showing Square Reader device

Battery issues in the Square Reader prevent Bluetooth from powering up properly. A fully charged reader runs 6-8 hours, but battery degradation reduces this significantly, causing failed connections. It helps to understand charging while operating before going further.

Bluetooth conflicts happen if multiple devices try to connect simultaneously or if the Reader remains paired with another device. The Reader can only maintain one active connection at a time.

App permission restrictions on iPhones (iOS) and Android devices can block Bluetooth scanning or pairing. Location services are particularly crucial on Android 6.0+ for Bluetooth device discovery.

Software bugs or outdated firmware in either the Reader or the Square app may cause intermittent or total connection failures. Keeping both updated minimizes this risk. People in this spot often ask about square stand fit for ipad 10.2 inch model as well.

Step-by-step fixes for Square Reader not connecting on iPhone

Start by confirming your iPhone’s Bluetooth is on and the Reader is sufficiently charged. Open the Square app and ensure it prompts to connect to the Reader.

If the Reader does not appear, restart both the iPhone and Reader. On iPhone, swipe up and quit the Square app fully before reopening it.

Check in iPhone Settings > Privacy > Bluetooth to confirm Square app has permission to use Bluetooth. Before you commit to anything, it is worth looking at updating firmware for square reader.

If the problem persists, reset network settings on the iPhone, but be aware this deletes saved Wi-Fi passwords and VPN settings.

Check for iOS and Square app updates, as each update may fix Bluetooth compatibility issues.

  1. Ensure Bluetooth is enabled on iPhone.
  2. Confirm Square Reader battery is charged.
  3. Restart iPhone and Square Reader.
  4. Verify Square app has Bluetooth permission in Settings.
  5. Reset network settings if necessary.
  6. Update iOS and Square app to latest versions.

Step-by-step fixes for Square Reader not connecting on Android

Square Reader charging on charging dock
Square Reader charging on charging dock

Android devices often require location permission along with Bluetooth for device discovery. Confirm that both are enabled and granted to the Square app. People in this spot often ask about contactless payment limit per transaction as well.

Open Settings > Apps > Square > Permissions and make sure Bluetooth and Location permissions are allowed.

Turn off Bluetooth on all other nearby devices to avoid connection conflicts with the Reader.

Restart your Android device and the Reader to clear Bluetooth cache and stale connections.

Clear the Bluetooth cache by going to Settings > Apps > Bluetooth > Storage > Clear Cache. This step fixes many persistent pairing issues.

Update both the Square app and your phone’s OS to the latest versions available.

  1. Enable Bluetooth and Location services on Android.
  2. Grant Square app Bluetooth and Location permissions.
  3. Disable Bluetooth on other nearby devices.
  4. Restart Android device and Square Reader.
  5. Clear Bluetooth cache from Android settings.
  6. Update Square app and Android OS.

Common mistakes that block Square Reader from connecting

Ignoring the battery charge level is a frequent mistake. A Reader with less than about 20% battery often fails to connect reliably.

Attempting to pair the Reader while it is connected to another device causes immediate failure because multiple concurrent connections are not supported.

Forgetting app permissions or disabling location services on Android devices prevents Bluetooth scanning, causing the Reader to be invisible during pairing.

Not restarting either the Reader or the phone when facing connection issues leads to confusion and unnecessary troubleshooting steps.

Using outdated software increases the chances of incompatibility and prevents the Reader from functioning correctly.

  • Battery low: charge before use or pairing attempts.
  • Single device pairing: disconnect other devices first.
  • Permissions off: enable Bluetooth and location for Square app.
  • No restarts: reboot devices to reset Bluetooth modules.
  • Outdated software: keep app and OS updated.

How to choose or replace a Square Reader when connection fails

iPhone settings showing Bluetooth permission for apps
iPhone settings showing Bluetooth permission for apps

If your Reader consistently fails to connect despite troubleshooting, battery deterioration or hardware failure is the likely cause. Square Readers commonly last 3-4 years under regular use.

Choosing a replacement depends on your business setup. The Square Reader for contactless and chip cards is standard; newer versions support faster Bluetooth LE and longer battery life.

Make sure your replacement supports Bluetooth LE and matches your device’s OS requirements (iOS 10+ or Android 5.0+ typically). Confirm by checking the product specifications before purchase.

Replacing your Reader gives you a fresh battery and updated hardware, cutting down downtime and connection headaches.

You will need a charging base or compatible USB cable with proper power output (5V USB standard) to keep the Reader running reliably.

  • Battery failure: causes frequent disconnections.
  • Hardware age: 3-4 years lifespan typical.
  • Bluetooth LE support: essential for compatibility.
  • OS compatibility: verify with your phone/tablet version.
  • Charging accessories: ensure correct voltage and amperage.

Square Reader not connecting: specific checks for Bluetooth, iPhone and Android

First, confirm Bluetooth signal strength is adequate: weak signals below about 10 feet or obstructed by metal or thick walls cause intermittent loss of connection.

On iPhone, check Bluetooth device list under Settings to see if the Reader appears and shows as connected. If not, a device reset or re-pair is necessary.

Android devices sometimes show the Reader as paired but not connected. Clearing Bluetooth cache and disabling Bluetooth from other apps can help.

Square's app may show error messages like "Reader Not Connected" or "Bluetooth Error." Follow prompts to retry or reset pairing.

If all else fails, test connecting the Reader to another phone to isolate the problem between Reader and phone.

Comparison of Bluetooth troubleshooting steps on iPhone vs Android
IssueiPhone troubleshootingAndroid troubleshooting
Reader not foundToggle Bluetooth, check device list, restart phoneEnable Location services, check app permissions, clear Bluetooth cache
Reader paired but not connectingForget device and re-pairForget device, clear app cache, restart device
Permissions blockedAllow Bluetooth in Privacy settingsAllow Bluetooth and Location in app permissions
Signal weak or intermittentMove phone and Reader closer, remove obstaclesSame; plus disable other Bluetooth devices nearby

Questions people still ask

Why does my Square Reader lose connection intermittently?

Intermittent disconnections often stem from low battery, Bluetooth interference from other devices, or weak signal strength caused by distance or obstacles.

Can I use Square Reader without Bluetooth?

No, the Square Reader requires Bluetooth LE to communicate with your phone or tablet during transactions.

Does a software update fix connection issues?

Yes, updates often include Bluetooth and compatibility fixes, so keeping the Square app and your phone’s OS current is important.

Why does Android need location permission for Bluetooth?

Starting with Android 6.0, location permission is required for Bluetooth scanning due to privacy policies tied to device location inference.

What if my Reader still won’t connect after all troubleshooting?

Persistent failure usually indicates hardware or battery failure, making a replacement Square Reader necessary to restore reliable operation.

I've personally resolved connection issues by focusing on charging status and app permissions before diving deeper into resets.